Stationary lathe chucks
Close filters
 
  •  
from to
No results were found for the filter!
Stationary four-jaw lathe chuck, type 310
Stationary four-jaw lathe chuck, type 310
Four-jaw lathe chuck type 310, stationary - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck as a two-way jaw unit - with...
€1,530.65 *
Stock: 3 
Stationäres Vierbacken-Drehfutter, Typ 250
Stationary four-jaw lathe chuck, type 250
Four-jaw lathe chuck type 250, stationary - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck as a two-way jaw unit - with...
€1,100.09 *
Stock: 2 
Stationäres Vierbacken-Drehfutter, Typ 200
Stationary four-jaw lathe chuck, type 200
Four-jaw lathe chuck type 200, stationary - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck as a two-way jaw unit - with...
€813.10 *
Stock: 2 
Stationäres Vierbacken-Drehfutter, Typ 165
Stationary four-jaw lathe chuck, type 165
Four-jaw lathe chuck type 165, stationary - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck as a two-way jaw unit - with...
€693.58 *
Stock: 3 
Stationäres Dreibacken-Drehfutter Typ 170
Stationary three-jaw lathe chuck, extra thin,...
Stationary three-jaw lathe chuck, type 170 - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws Clamping range: 8 - 160 mm
€621.79 *
Stock: 3 
Stationäres Dreibacken-Drehfutter Typ 305
Stationary three-jaw lathe chuck, extra thin,...
Stationary three-jaw lathe chuck, type 305 - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws Clamping range: 15 - 300 mm
€1,434.96 *
Stock: 3 
Stationary three-jaw lathe chuck, extra thin, type 210
Stationary three-jaw lathe chuck, extra thin,...
Stationary three-jaw lathe chuck, type 255 - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws Clamping range: 12 - 250 mm
€1,052.35 *
Stock: 2 
Stationäres Dreibacken-Drehfutter Typ 210
Stationary three-jaw lathe chuck, extra thin,...
Stationary three-jaw lathe chuck, type 210 - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws Clamping range: 11 - 200 mm
€741.46 *
Stock: 6 

Stationary lathe chucks

Viewed