Angle plates / Swivel angle plates
Top seller
No results were found for the filter!
Swivel angle plate type 5150-250x315
Swivel angle plate, Bison type 5150 - dimensions (A x B): 250 x 315 mm - easily set at any angle between horizontal and vertical plates - the plate will accept accessories and workpieces larger than the table top
€1,145.60
*
Swivel angle plate type 5155-250x315
Swivel angle plate, Bison type 5155 - dimensions (A x B): 250 x 315 mm - easily set at any angle between horizontal and vertical plates - swivel plate type 5155 (sine) permit acurate angle setting in 0-60° range by means of gauge blocks
€1,297.60
*
Swivel angle plate type 5155-200x250
Swivel angle plate, Bison type 5155 - dimensions (A x B): 200 x 250 mm - easily set at any angle between horizontal and vertical plates - swivel plate type 5155 (sine) permit acurate angle setting in 0-60° range by means of gauge blocks
€1,261.60
*
Swivel angle plate type 5150-200x250
Swivel angle plate, Bison type 5150 - dimensions (A x B): 200 x 250 mm - easily set at any angle between horizontal and vertical plates - the plate will accept accessories and workpieces larger than the table top
€1,117.60
*
Angle plate with clamping slots, type AWSS 200
Angle plate with clamping slots t ype AWSS 200 - special cast iron - machined on 2 sides - clamping surface and base with clamping slots - reinforced by ribs - squareness and parallelism: 0,01 mm / 100 mm
€86.62
*
Stock: 17
Angle plate with t-slots, type RS28-400/18
Angle plate with t-slots t ype RS28-400/18 - size (A x B): 400 x 400 mm - width of the t-nuts: 18 mm - GG 30 stress-annealed
€1,076.04
*
Stock: 2
Angle plate with t-slots, type RS28-300/14
Angle plate with t-slots t ype RS28-300/14 - size (A x B): 300 x 300 mm - width of the t-nuts: 14 mm - GG 30 stress-annealed
€671.69
*
Stock: 1
Angle plate with t-slots, type RS28-630/18
Angle plate with t-slots t ype RS28-630/18 - size (A x B): 630 x 630 mm - width of the t-nuts: 18 mm - GG 30 stress-annealed
€2,681.06
*
Stock: 1
Angle plate with t-slots, type RS28-500/18
Angle plate with t-slots t ype RS28-500/18 - size (A x B): 500 x 500 mm - width of the t-nuts: 18 mm - GG 30 stress-annealed
€1,727.78
*
Angle plate with t-slots, type RS28-300/18
Angle plate with t-slots t ype RS28-300/18 - size (A x B): 300 x 300 mm - width of the t-nuts: 18 mm - GG 30 stress-annealed
€671.69
*
Stock: 2
Angle plate with t-slots, type RS28-800/14
Angle plate with t-slots t ype RS28-800/14 - size (A x B): 800 x 800 mm - width of the t-nuts: 14 mm - GG 30 stress-annealed
€4,205.23
*
Stock: 1
Angle plate with t-slots, type RS28-630/14
Angle plate with t-slots t ype RS28-630/14 - size (A x B): 630 x 630 mm - width of the t-nuts: 14 mm - GG 30 stress-annealed
€2,681.06
*
Stock: 1
Viewed