HSK Tool holders for milling machines
Close filters
 
  •  
from to
1 From 8
No results were found for the filter!
Blank adaptor HSK-A 63, Ø 63 mm
Blank adaptor HSK-A 63, Ø 63 mm
Blank adaptor - form A - DIN 69893 - HSK 63A / D 63 mm
€94.75 *
Stock: 8 
Blank adaptor HSK-A 63, Ø 65 mm
Blank adaptor HSK-A 63, Ø 65 mm
Blank adaptor - form A - DIN 69893 - HSK 63A / D 65 mm
€28.15 *
Stock: 207 
Adaptor for morse taper tools HSK-A 63, MT 1
Adaptor for morse taper tools HSK-A 63, MT 1
Adaptor for morse taper tools with tang - form A - HSK 63A - MK 1
€70.85 *
Stock: 3 
Adaptor for morse taper tools HSK-A 63, MT 2
Adaptor for morse taper tools HSK-A 63, MT 2
Adaptor for morse taper tools with tang - form A - HSK 63A - MK 2
€75.82 *
Stock: 5 
Adaptor for morse taper tools HSK-A 63, MT 3
Adaptor for morse taper tools HSK-A 63, MT 3
Adaptor for morse taper tools with tang - form A - HSK 63A - MK 3
€77.98 *
Stock: 1 
Adaptor for morse taper tools HSK-A 63, MT 4
Adaptor for morse taper tools HSK-A 63, MT 4
Adaptor for morse taper tools with tang - form A - HSK 63A - MK 4
€79.42 *
Stock: 3 
Screw-in type milling arbor, HSK-A 63, M10-100
Screw-in type milling arbor, HSK-A 63, M10-100
Srew-in type milling arbor - form A - DIN 69893 - balanced G = 6,3 15.000 U/min. - HSK-A 63 - G: M10 - L: 100 mm
€121.46 *
Stock: 3 
Screw-in type milling arbor, HSK-A 63, M10-50
Screw-in type milling arbor, HSK-A 63, M10-50
Srew-in type milling arbor - form A - DIN 69893 - balanced G = 6,3 15.000 U/min. - HSK-A 63 - G: M10 - L: 50 mm
€103.97 *
Stock: 2 
Screw-in type milling arbor, HSK-A 63, M12-100
Screw-in type milling arbor, HSK-A 63, M12-100
Srew-in type milling arbor - form A - DIN 69893 - balanced G = 6,3 15.000 U/min. - HSK-A 63 - G: M12 - L: 100 mm
€121.46 *
Stock: 2 
Screw-in type milling arbor, HSK-A 63, M12-25
Screw-in type milling arbor, HSK-A 63, M12-25
Srew-in type milling arbor - form A - DIN 69893 - balanced G = 6,3 15.000 U/min. - HSK-A 63 - G: M12 - L: 25 mm
€93.89 *
Stock: 2 
Screw-in type milling arbor, HSK-A 63, M12-50
Screw-in type milling arbor, HSK-A 63, M12-50
Srew-in type milling arbor - form A - DIN 69893 - balanced G = 6,3 15.000 U/min. - HSK-A 63 - G: M12 - L: 50 mm
€103.97 *
Stock: 1 
Screw-in type milling arbor, HSK-A 63, M12-75
Screw-in type milling arbor, HSK-A 63, M12-75
Srew-in type milling arbor - form A - DIN 69893 - balanced G = 6,3 15.000 U/min. - HSK-A 63 - G: M12 - L: 75 mm
€112.61 *
Stock: 3 
1 From 8

HSK Tool holders for milling machines

Viewed