Lathe chucks and jaws
Close filters
 
  •  
from to
1 From 71
No results were found for the filter!
Pneumatic collet chucks for collets 161E
Pneumatic collet chucks for collets 161E
Pneumatic collet chuck for dead length collets 161E (2-26) - pneumatic clamping - precise centering of work piece - for horizontal and vertical application
€837.65 *
Stock: 2 
Pneumatic collet chucks for collets 173E
Pneumatic collet chucks for collets 173E
Pneumatic collet chuck for dead length collets 173E (3-42) - pneumatic clamping - precise centering of work piece - for horizontal and vertical application
€1,081.87 *
 
Pneumatic chucking device, modules, 120E
Pneumatic chucking device, modules, 120E
Pneumatic chucking device, modules, for collets 120E (2-12) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€903.53 *
 
Pneumatic chucking device, modules, 140E
Pneumatic chucking device, modules, 140E
Pneumatic chucking device, modules, for collets 140E (2-18) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€831.17 *
Stock: 1 
Pneumatic chucking device, modules, 161E
Pneumatic chucking device, modules, 161E
Pneumatic chucking device, modules, for collets 161E (2-26) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€1,364.40 *
 
Pneumatic chucking device, modules, 173E
Pneumatic chucking device, modules, 173E
Pneumatic chucking device, modules, for collets 173E (3-42) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€1,194.55 *
Stock: 1 
Pneumatic chucking device, modules, W20
Pneumatic chucking device, modules, W20
Pneumatic chucking device, modules, for collets W20 (2-20) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€1,085.90 *
 
2-jaw scroll chuck DIN 6350 Bison type 3105-160
2-jaw scroll chuck DIN 6350 Bison type 3105-160
2-jaw scroll chuck DIN 6350 Bison - plain back mounting DIN 6350 - type 3105 Ø 160 mm - hardened and ground working surfaces - balanced scroll plate - material of body: cast iron - 2-piece jaws - incl. 1 set of soft top jaws, 1 set of...
€444.75 *
 
2-jaw scroll chuck DIN 6350 Bison type 3105-200
2-jaw scroll chuck DIN 6350 Bison type 3105-200
2-jaw scroll chuck DIN 6350 Bison - plain back mounting DIN 6350 - type 3105 Ø 200 mm - hardened and ground working surfaces - balanced scroll plate - material of body: cast iron - 2-piece jaws - incl. 1 set of soft top jaws, 1 set of...
€559.50 *
 
2-jaw scroll chuck DIN 6350 Bison type 3105-250
2-jaw scroll chuck DIN 6350 Bison type 3105-250
2-jaw scroll chuck DIN 6350 Bison - plain back mounting DIN 6350 - type 3105 Ø 250 mm - hardened and ground working surfaces - balanced scroll plate - material of body: cast iron - 2-piece jaws - incl. 1 set of soft top jaws, 1 set of...
€701.25 *
 
2-jaw scroll chuck DIN 6350 Bison type 3105-315
2-jaw scroll chuck DIN 6350 Bison type 3105-315
2-jaw scroll chuck DIN 6350 Bison - plain back mounting DIN 6350 - type 3105 Ø 315 mm - hardened and ground working surfaces - balanced scroll plate - material of body: cast iron - 2-piece jaws - incl. 1 set of soft top jaws, 1 set of...
€1,112.25 *
 
3-jaw scroll chuck Bison type 3204-80
3-jaw scroll chuck Bison type 3204-80
3-jaw scroll chuck Bison - plain back mounting DIN 6350 - type 3204 Ø 80 mm - ground working surfaces - material of body: cast iron - solid jaws - incl. 1 set of hard outside-inside solid jaws, 1 set of hard outside solid jaws and 1 wrench
€318.00 *
 
1 From 71

Lathe chucks and jaws

Viewed