Lathe chucks
Top seller
No results were found for the filter!
Pneumatic chucking device, modules, W20
Pneumatic chucking device, modules, for collets W20 (2-20) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€965.45
*
Pneumatic chucking device, modules, 173E
Pneumatic chucking device, modules, for collets 173E (3-42) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€1,093.90
*
Pneumatic chucking device, modules, 161E
Pneumatic chucking device, modules, for collets 161E (2-26) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€1,249.42
*
Pneumatic chucking device, modules, 140E
Pneumatic chucking device, modules, for collets 140E (2-18) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€761.11
*
Pneumatic chucking device, modules, 120E
Pneumatic chucking device, modules, for collets 120E (2-12) - pneumatically operated collet chuck - suitable for side by side application - for horizontal and vertical use - incl. two brackets
€827.42
*
5C- collet chuck with radial fine adjustment
5C-collet chuck, centre mount with radial fine adjustment - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and...
€320.11
*
5C-collet chuck with adapter, DIN 55029, taper 5"
5C-collet chuck DIN 55029 - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange times - incl....
€503.06
*
5C-collet chuck with adapter, DIN 55029, taper 4"
5C-collet chuck DIN 55029 - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange times - incl....
€447.98
*
5C-collet chuck with adapter, DIN 55027, taper 5"
5C-collet chuck DIN 55027 - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange times - incl....
€503.06
*
5C-collet chuck with adapter, DIN 55027, taper 4"
5C-collet chuck DIN 55027 - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange times - incl....
€447.98
*
5C-collet chuck, centre mount
5C-collet chuck - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange times - incl. wrench and...
€174.74
*
Hard master jaws for 2-jaw scroll chucks Ø 400 mm
Hard master jaws for Bison 2-jaw scroll chucks Ø 400 mm - material: steel - 2 pieces/set
€267.00
*
Viewed