Lathe chucks - Zentra
Top seller
No results were found for the filter!
Three-jaw lathe chuck DIN 55029 Ø 250 mm, Taper 6
Dreibacken-Drehfutter DIN 55029 Ø 250 mm - according to DIN 55029 (Camlock), one-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering...
€821.66
*
Stock: 6
Three-jaw lathe chuck DIN 55029 Ø 250 mm, Taper 8
Three-jaw lathe chuck DIN 55029 Ø 250 mm - according to DIN 55029 (Camlock), one-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering...
€821.66
*
Stock: 3
Three-jaw lathe chuck DIN 55029 Ø 315 mm, Taper 11
Three-jaw lathe chuck DIN 55029 Ø 315 mm - according to DIN 55029 (Camlock), one-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering...
€1,274.83
*
Stock: 1
Three-jaw lathe chuck DIN 55029 Ø 315 mm, Taper 6
Three-jaw lathe chuck DIN 55029 Ø 315 mm - according to DIN 55029 (Camlock), one-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering...
€1,274.83
*
Three-jaw lathe chuck DIN 55029 Ø 315 mm, Taper 8
Three-jaw lathe chuck DIN 55029 Ø 315 mm - according to DIN 55029 (Camlock), one-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering...
€1,274.83
*
Stock: 3
Three-jaw lathe chuck DIN 55029 Ø 400 mm, Taper 8
Three-jaw lathe chuck DIN 55029 Ø 400 mm - according to DIN 55029 (Camlock), one-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering...
€2,109.02
*
Stock: 2
Three-jaw lathe chuck DIN 55029 Ø 400 mm, Taper 11
Three-jaw lathe chuck DIN 55029 Ø 400 mm - according to DIN 55029 (Camlock), one-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering...
€2,109.02
*
Stock: 2
Three-jaw lathe chuck DIN 6350 Ø 125 mm
Three-jaw lathe chuck DIN 6350 - centre mount, two-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering clamping jaws, high concentricity -...
€348.41
*
Stock: 4
Three-jaw lathe chuck, fine adjustment Ø 125
Three-jaw lathe chuck Ø 125 mm, two-piece jaws - lathe chucks with radial fine adjustment provides high concentricity, suitable for admission from the front - adjusting accuracy within 0,005 mm - repeatibility 0,015 mm - suitable for all...
€425.02
*
Stock: 1
Three-jaw lathe chuck DIN 6350 Ø 160 mm
Three-jaw lathe chuck DIN 6350 - centre mount, two-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering clamping jaws, high concentricity -...
€407.02
*
Stock: 5
Three-jaw lathe chuck, fine adjustment Ø 160
Three-jaw lathe chuck Ø 160 mm, two-piece jaws - lathe chucks with radial fine adjustment provides high concentricity, suitable for admission from the front - adjusting accuracy within 0,005 mm - repeatibility 0,015 mm - suitable for all...
€438.98
*
Three-jaw lathe chuck DIN 6350 Ø 200 mm
Three-jaw lathe chuck DIN 6350 - centre mount, two-piece jaws - suitable for all types of lathes and different kinds of milling, drilling and CNC devices - homogeneous clamping force by self-centering clamping jaws, high concentricity -...
€518.33
*
Stock: 5
Viewed