No results were found for the filter!
Internally stepped solid jaws for lathe chucks 4 pieces per set
€1,048.61
*
Internally stepped solid jaws for lathe chucks Ø 125 mm - 6 pieces per set
€159.12
*
Stock: 1
Internally stepped solid jaws for lathe chucks Ø 160 mm - 6 pieces per set
€183.89
*
Stock: 2
Internally stepped solid jaws for lathe chucks Ø 200 mm - 6 pieces per set
€193.75
*
Stock: 2
Internally stepped solid jaws for lathe chucks Ø 250 mm - 6 pieces per set
€232.34
*
Stock: 2
Internally stepped solid jaws for lathe chucks Ø 315 mm - 6 pieces per set
€379.58
*
Internally stepped solid jaws for lathe chucks Ø 400 mm - 6 pieces per set
€496.44
*
Work piece stop height 15 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm - for work pieces Ø 15 - 130 mm - material: aluminium
€63.86
*
Work piece stop height 20 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm - for work pieces Ø 15 - 130 mm - material: aluminium
€65.16
*
Stock: 3
Work piece stop height 25 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm - for work pieces Ø 15 - 130 mm - material: aluminium
€66.46
*
Stock: 2
Work piece stop height 30 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm - for work pieces Ø 15 - 130 mm - material: aluminium
€67.75
*
Stock: 2
Work piece stop height 35 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm - for work pieces Ø 15 - 130 mm - material: aluminium
€69.05
*
Stock: 2
Products from Gedema
Viewed