Depth vernier caliper 150 x 100 mm
- made of stainless steel - scale and nonius satin chrome finished - nonius 1/20 mm, accuracy DIN 862 - in case/box Range 0 - 150 mm
Digital depth caliper 0 - 200 mm with metal casing
- made of stainless steel, hardened - reading 0,01 mm or 0,0005" - accuracy DIN 862 - electronic with 3 V system - with metal casing - with on/off, zero, unit and hold button - with RS232C data output (RB5)- base 100 mm - in case/box
Range 0 - 200 mm
Digital dial indicator 12,7 x 0,01 mm
- absolute system with 3 V - scale with glass rail for precision sampling - with digital LCD display - display rotatable 0 - 330° - measuring direction reversible - with ON/OFF, ORIGIN, ZERO/ABS, PRESET, TOL, mm/inch and "+/-" button - data output RS232 (RB 6) - clamp shank 8 h6 - in case/box
Reading: 0,01 mm Accuracy: 10 µm Repeat acc.: 5 µm Range: 12,7 mm
Digital pocket caliper 0 - 150 mm
- DIN 862, measuring system with 3V- scale with glass rail for precison sampling- made of stainless steel, hardened- 4- way measurement- with ON/OFF, ZERO, UNIT and HOLD buttons (with HOLD button the measuring value can be memorized for later reading)- data output (RB 5)- usable with or without roll (fitting included)- in case/box
Range 0 - 150 mm
Digital pocket caliper small 0-100 mm
- with metal casing, DIN 862- made of stainless steel, hardened- usable to 4- way measurement - with ON/OFF, mm/inch and ZERO button- reading 0,01 mm or 0,0005"- accuracy 0,03 mm- in case/box
Range 0-100 mm
Height and marking gauge analogue 300 mm
- made of special steel - with fine adjustment - with carbide needle - scale and nonius satin chrome finished - accuracy to DIN 862
Range : 300 mm
Precision control caliper 0 - 1000 mm with points
- made of stainless steel, hardened- satin chrome finished- monoblock- for outside, inside and step measuring- with fine adjustment- reading 0,05 mm / 1/128"- accuracy DIN 862- in case/box (for transport only)
Jaws 150 mmRange 1000 mm
Three point internal micrometer set 12-20 mm
- 2 pcs./set - DIN 863 - for blind hole - with carbide measuring faces - satin chrome finished - with setting gauge 16 mm and extension 150 x Ø 11,7 mm - in case/box Range 12 - 20 mm
Vernier caliper 0-150 mm range with auto lock
- made of stainless steel, DIN 862 - satin chrome finished, hardened - usable to 4-way measurement - backside with screw table - in case/box Range 0-150 mm
€15.12*
€16.80*(10% saved)
Stock: 2845
This website uses cookies to ensure the best experience possible. More information...
