Reduction sleeves for boring bar holders type E2
Close filters
 
  •  
from to
1 From 2
No results were found for the filter!
Reduction sleeve 25 / 06 mm for boring bar holders
Reduction sleeve 25 / 06 mm for boring bar holders
Reduction sleeve 25-06 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 25 mm, D1: 6 mm
€20.52 *
Stock: 5 
Reduction sleeve 25 / 08 mm for boring bar holders
Reduction sleeve 25 / 08 mm for boring bar holders
Reduction sleeve 25-08 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 25 mm, D1: 8 mm
€20.52 *
Stock: 26 
Reduction sleeve 25 / 10 mm for boring bar holders
Reduction sleeve 25 / 10 mm for boring bar holders
Reduction sleeve 25-10 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 25 mm, D1: 10 mm
€20.52 *
Stock: 23 
Reduction sleeve 25 / 12 mm for boring bar holders
Reduction sleeve 25 / 12 mm for boring bar holders
Reduction sleeve 25-12 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 25 mm, D1: 12 mm
€20.52 *
Stock: 38 
Reduction sleeve 25 / 16 mm for boring bar holders
Reduction sleeve 25 / 16 mm for boring bar holders
Reduction sleeve 25-16 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 2 - D: 25 mm, D1: 16 mm
€20.52 *
Stock: 50 
Reduction sleeve 25 / 20 mm for boring bar holders
Reduction sleeve 25 / 20 mm for boring bar holders
Reduction sleeve 25-20 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 2 - D: 25 mm, D1: 20 mm
€20.52 *
Stock: 30 
Reduction sleeve 32 / 06 mm for boring bar holders
Reduction sleeve 32 / 06 mm for boring bar holders
Reduction sleeve 32-06 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 32 mm, D1: 6 mm
€21.10 *
Stock: 14 
Reduction sleeve 32 / 08 mm for boring bar holders
Reduction sleeve 32 / 08 mm for boring bar holders
Reduction sleeve 32-08 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 32 mm, D1: 8 mm
€21.10 *
Stock: 37 
Reduction sleeve 32 / 10 mm for boring bar holders
Reduction sleeve 32 / 10 mm for boring bar holders
Reduction sleeve 32-10 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 32 mm, D1: 10 mm
€21.10 *
Stock: 33 
Reduction sleeve 32 / 12 mm for boring bar holders
Reduction sleeve 32 / 12 mm for boring bar holders
Reduction sleeve 32-12 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 1 - D: 32 mm, D1: 12 mm
€21.10 *
Stock: 22 
Reduction sleeve 32 / 16 mm for boring bar holders
Reduction sleeve 32 / 16 mm for boring bar holders
Reduction sleeve 32-16 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 2 - D: 32 mm, D1: 16 mm
€21.10 *
Stock: 36 
Reduction sleeve 32 / 20 mm for boring bar holders
Reduction sleeve 32 / 20 mm for boring bar holders
Reduction sleeve 32-20 for boring bar holders, type E2 - reduction sleeve for clamping of tools with cylindrical shank - form 2 - D: 32 mm, D1: 20 mm
€21.10 *
Stock: 30 
1 From 2

Reduction sleeves for boring bar holders type E2

Viewed